Download
Phantom Sounds Outdoor System PSOD instruction sheet for installation to view this instruction sheet for installation
Outdoor Installation Instructions
1. Determine desired speaker locations
(see layout sheet ).
2. If speaker is to be mounted in landscaping, hand tighten
stake provided into bottom of satellite speakers. Do not hit the top of the
satellite speaker with anything. If the ground is too hard to drive in by
hand use a screwdriver to drive in the ground first, then insert the stake
into the hole created by the screwdriver. If speaker is to be mounted to
the house or deck post, then attach the mounting bracket in the desired
location using the stainless #6 wood screws provided. Then using the 3/8
stainless bolt and lock washer, attach satellite speakers to the bracket.
(Be sure not to over tighten, the threads can be stripped in the satellite
speaker).
3. Run the wires from the satellite speakers to the bass unit. Be sure to
bury the
wires so they won't be damaged during planting and mowing.
4. Attach the satellite speaker wires to the bass unit, two satellite
speakers to each terminal. Make sure to observe the polarity (the red
"+" and black "-").
5. Attach speaker wire from stereo to the terminal on the bass speaker.
Make sure to observe the polarity (the red "+" and the black
"-").
Back to
top
Layout Sheet
Sub-Woofer Location
Best - In a corner within the sound envelope
Better - Near a wall within the sound envelope
Good - In landscaping or under a deck in the sound envelope
Satellite Speakers Location
No farther than 30' from sub-woofer location encompassing the desired
covered area.
Take care to locate the wires so they are not a trip hazard and won't be
cut by a weed eater or other lawn equipment.
Back to
top
|
